News


A first snapshot of the calculation tool for motor systems, a technical guide on all the need-to-knows (technical standards, Ecodesign process, minimum energy performance standards, etc.) and an energy-efficiency oriented training material for skilled professionals: this is what Task B & E is working on. For m...

Rita Werle IEA-4E Motor Systems

A summary of IEC standards on rotating electrical machines is now available on the EMSA site.

Rita Werle IEA-4E Motor Systems

The definite program for the Motor Summit 2010 is now available on www.motorsummit.ch.

Rita Werle IEA-4E Motor Systems

Detailed program and registration are now available on www.motorsummit.ch

IEA-4E Motor Systems

The next Motor Summit will be held from 26 to 28 October 2010 in Zurich Switzerland. Details are on www.motorsummit.ch

IEA-4E Motor Systems

EMSA has a packed agenda at EEMODS in Nantes France: from 14 to 17 September 2009:  Project meeting on 14 September 2009, Testing Centres Workshop on 17 September, 12 presentations at the EEMODS-Conference from 15-16 September 2009 (see table below):   Author (lead) Titel of paper (order of...

CUB IEA-4E Motor Systems

17 September 2009, Nantes, France The first meeting of motor testing engineers is planned to take part in Nantes, France on 17 September 2009 (at the same location as EEMODS'09 from 15 - 17 September 2009, www.eemods09.fr). If you wish to attend this workshop, please contact Sarah Hatch by email (sarah.hatch@envir...

Jesper Spang IEA-4E Motor Systems

USA Electric Power Utility Companies have a wide array of ongoing motor and motor systems rebate programs to prepare the market to move from the present mandatory level at EPAct (IE2) to Premium Efficiency (IE3) level by 2011. See CEE for list of utilities and details: http://www.cee1.org/files/2009MotorsProgr...

CUB IEA-4E Motor Systems

MEPS for motors and pumps officially published

IEA-4E Motor Systems

The EMSA Newsletter Number 2 / 2009 was issued for the first time also in Chinese. You can read it under EMSA Newsletter.

CUB IEA-4E Motor Systems

European Ecodesign Regulatory Committee voted on 11 and 27 March 2009 to introduce mandatory standards by 2011 for motors and by 2013 circulator pumps.

CUB IEA-4E Motor Systems

IEC has published on 3 April 2009 its "Guide for the selection and application of energy-efficient motors" as draft for review.

CUB IEA-4E Motor Systems

EU Member States showed their support for new rules to reduce the electricity consumption of industrial motors during the 11 March 2009 Ecodesign Regulatory Committee meeting.The Regulation will forbid the placing on the market of motors below IE2 efficiency by 2011 and will allow only IE3 motors for big motors fro...

CUB IEA-4E Motor Systems

The first edition of an Electric Motor MEPS Guide has been published to explain steps towards mandatory energy performance standards. If you have any comments mail to cub@cub.ch

CUB IEA-4E Motor Systems

Motor Summit 24 - 26 November 2008 held in Zurich Switzerland

IEA-4E Motor Systems

On 24 November 2008 a Side Event of the Motor Summit'08 was held in Zurich Switzerland. The EMSA Task leaders informed a wider audience on their program starting in 2009.The minutes of the meeting are available here.

IEA-4E Motor Systems

The IEA 4E Executive Committee has unanimously accepted the Motor Systems project plan 2009 - 2011

IEA-4E Motor Systems

New IEC Standard on Motor Efficiency Classes Published

IEA-4E Motor Systems

Recent new IEC standards and guides on electric motors

IEA-4E Motor Systems

At the meeting in Zurich on 10 June 2008 the Tasks A to G were decided and the respective Task leaders nominated.

IEA-4E Motor Systems

The European Ecodesign Directive for Energy-using Products (EuP) is proposing Minimum Energy Performance Standards (MEPS) for electric motors.

IEA-4E Motor Systems

First 4E MS meeting in Zurich

IEA-4E Motor Systems
 

IEA-4E | EMSA | Sitemap | Disclaimer | Login